TerraSaline 3.5 / 7.0

The TerraSaline 3.5 (7.0) is used for the concentration of liquids with low biology until ZLD. The extraction of solids can be done manually or automatically. The request for more water to be treated can be easily answered with the usage of additional TerraSaline.

Performance data TerraSaline	3.5	7.0
treated water:	3,5 m³/day	7,0 m³/day
product water:	3,0 m³/day	6,0 m³/day
conductivity:	< 50 µS/cm
temperature:	approx. 10 °C higher as raw water temp
solid extraction:	Separation between different solids is possible, the amount depends on the starting concentration.

Equipment
switch cabinet:	included
heat source interface:	included
solid extraction:	manually or automatically
mineralization:	optional
raw water tank:	optional
product water tank:	optional
water transport from and to the system:	optional

Technical data TerraSaline	3.5	7.5
dimensions WxDxH (for both variants the same):	40‘ HC Container 12,2 x 2,4 x 2,9 m
weight (empty):	9.000 kg	12.000 kg
needed thermal input:	approx. 30 kWth	approx. 60 kWth
needed electrical input:	approx. 5 kWel	approx. 10 kWel
flow-temperature (for both variants the same):	95 °C
return temperature:	85°C
power supply (for both variants the same):	380 V AC, 50/60Hz
recovery rate(for both variants the same):	max. 98% + wet solids
no chemicals
The container module could also work with other temperatures and thermal inputs. The daily production may change accordingly.

Raw water
salinity:	regardless, very high salinities are preferable
biology:	low
temperature:	up to 90°C
coarse filtration:	1 mm

Ambient conditions
Minimum temperature:	-15°C, below that the outlet slows down
Maximum temperature:	+45°C, above this a cabinet cooling is necessary

General
Variations on the energy side may influence the daily production. Performance data may vary as a result of the ambient parameters. Subject to changes.

Data Sheet TerraSaline 3.5 / 7.0 (pdf)